Table of Contents
Advertisement
Canopy T1/E1 Multiplexer
2.5.2
Changing the Administrator Password
There is only one account for the Canopy T1/E1 Multiplexer—the administrator account.
The username may not be changed, however the password may be changed at any time.
Procedure 15: Changing Administrator password using the EMS
Use this procedure to change the password from the EMS.
1. Select File→Change password from the main menu.
RESULT: The Change Password dialogue box opens (shown in
2. Type the old password, then press Enter or Tab.
3. Type the new password, then press Enter or Tab.
4. Enter the new password again, then press Enter or Tab.
5. To accept, click Change.
To reject, click Cancel.
Issue 1
Figure 20: Change Password dialogue box
end of procedure
T1/E1 Multiplexer Release 3.1
June 2004
Figure
20).
45 of 69
Page
Advertisement
Table of Contents
