M Icrophone K Ey L Ock; M Icrophone Pf K Eys (O Ptional ) - Kenwood TH-255A Instruction Manual

M k
icropHone
The Microphone Key Lock function will lock the microphone PF
keys.
1 Enter Menu mode and access Menu No. 24 (M.PF.).
2 Press [MENU], then rotate the Selector (or press [UP]/ [DOWN])
to select "OFF".
3 Press [MENU] to store the setting.
4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit
Menu mode.
M pF k
icropHone
If you have an optional SMC-33 or SMC-34 speaker microphone,
you can access many transceiver settings without using transceiver
keys or controls. Microphone keys 1, 2, and 3, located on the top of
the microphone, are programmable with transceiver functions.
The microphone key default assignments are as follows:
Mic [1]: VFO
Note:
◆ Turn the transceiver OFF before connecting the optional speaker
microphone.
◆ While Menu No. 24 (M.PF.) is "OFF" or the Lock function is ON,
you cannot program PF keys.
◆ If the LOCK switch on the rear of the microphone is ON, you must
move the switch to the OFF position to program the keys.
1 Press one of the following key combinations to reprogram the
keys on the speaker microphone.
• Press Mic [1] + Power ON to reprogram Mic [1].
• Press Mic [2] + Power ON to reprogram Mic [2].
• Press Mic [3] + Power ON to reprogram Mic [3].
2 Press a key or the key combination you want to assign to the
microphone key.
60
l
ey ock
(o
eys pTional
Mic [2]: MR
)
Mic [3]: CALL