Reset; Registering New Handset With Base; To Register A Handset - Samsung SP-R5200 User Manual

Reset

If you reset the handset, all the user-selectable features
return to the manufacturer's default status as shown below:
• Voice Volume: Level 3
• Ring Level: Level 2
• Ring Type: Type 1
• Key Beep: On
• Call Time display: Off
Note: Dial type is not changed if you reset the handset.
1. Press or button repeatedly until
2. Press button.
3. Enter the PIN code.
4. Press button.
40
.Digital Cordless Telephone
• Call Barring: Off
• Ring Delay: Off
• Auto Find: Off
• Base Number display: On
• PIN Number: 0000
appears.

Registering New Handset with Base

Up to six handsets can be registered and operated from your
base unit. The system allows you to make internal calls
between two handsets while a third is making an call.
The supplied handset with the base unit is already registered
as handset 1. Each additional handset you purchase must be
registered to the base unit.

To Register a Handset

1. Press or button repeatedly until
appears in the display, then press
2. Enter the PIN code, then press
3. Press or button repeatedly to choose the base number
you want to specify for the base.
4. Press and hold the button on the base unit for more than 3
seconds until the lamp on the base unit blinks.
button.
button.
Press the button to access
registration mode.
Digital Cordless Telephone
41