Table of Contents
Advertisement
FUNCTIONAL
DESCRIPTION
1
3
1. Counterclockwise
2. Switch trigger
3. Clockwise
ASSEMBLY
1. Reference markings
1
2
1. Chuck key
2. Wrench
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003012
CAUTION:
•
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
2
position when released.
•
Change the direction of rotation only when the tool
comes to a complete stop. Changing it before the tool
stops may damage the tool.
The switch is reversible, providing either clockwise or coun-
terclockwise rotation. To start the tool, simply pull the lower
part of the switch trigger for clockwise or the upper part for
counterclockwise. Release the switch trigger to stop.
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing angle attachment
003062
1
The angle head has a spindle on each end. For higher speed
operation, attach the drill chuck to the end marked "HIGH".
The higher speed is better suited for drilling smaller diameter
holes.
For lower speed operation, attach the drill chuck to the end
marked "LOW". The lower speed is best utilized for drilling
larger diameter holes.
When you wish to attach the drill chuck to the opposite end
003063
to change the speed, proceed as follows.
First, open the chuck jaws completely and then remove the
screw through the chuck opening by turning it clockwise (left
hand threaded screw) with the hex wrench. Grip the hex end
of the spindle with the wrench and place the chuck key in one
of the key holes. Hammer the chuck key lightly in the direc-
tion of the arrow (counterclockwise) until the drill chuck can
be removed. If you use a special wrench set (optional acces-
sory), you can remove the drill chuck easily.
5
Hide quick links:
Advertisement
Table of Contents
