Maintaining Your; Maintenance; Wiring Diagram - Makita SJ401 Instruction Manual

Maintaining Your
MAINTENANCE
WARNING:
For your own safety, push control knob
"OFF" and remove plug from power source outlet
before maintaining or lubricating your
saw.
General
An occasional coat of paste wax on the work table will allow
the wood being cut to glide smoothly across the work
surface.
Motor
If the power cord is worn, cut or damaged in any way, have it
replaced immediately.
Do not attempt to oil the motor bearings or service the motor
internal parts.
0
n
Arm Bearings
Lubricate the arm bearings after 10 hours of use. Re-oil after
every 50 hours of use or whenever there is squeak coming
from the bearings.
METHOD OF OILING BEARINGS
1. Turn saw on its side.
2. Squirt a generous amount of SAE20 Oil around the shaft
3. Let the oil soak in overnight in this position.
4. Next day repeat the above procedure for the opposite
end and bronze bearing.
side of the saw.
WIRING DIAGRAM
15