Time Schedule - Samsung SNP-3120 User Manual

setup screen

J
Even if the <Video analysis> is enabled, the video analysis function does not work when
entering through the operating menu in the camera.

If camera is capturing a close object, the video analysis capability may degrade. In the following
cases, the video analysis function may not produce a proper result on the default event and
motion detections.
-
The object color or brightness is similar to the background
-
Multiple movements continue occurring at random due to a scene change or other reasons.
-
A fixed object continues moving in the same position.
-
An object hides other objects behind.
-
Two or more objects overlap or one object divides in multiple portions
-
Too fast object (for a proper detection, one object should be found overlapping between
contiguous frames).
-
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp
-
In severe snow, rain, wind or in dawn / dusk
-
A moving object comes close to the camera

Time schedule

You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <Enable>.
2. Specify the <Activation time>.
 Always : Always activates in operated
mode at the set interval.
 Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
98_ setup screen
)> tab.