Setup Screen - Samsung SNP-3120 User Manual

setup screen

To move a preset
1. Select a preset number that you want to move.
2. Press the [
To set the camera operation for the preset
1. Select the number of preset that you
want to configure.
2. Press the [
3. When the Setup window appears,
select each item and set appropriately.
- PTZ Coordinate : Set the Pan/Tilt/
Zoom position of the preset.
- Focus / Zoom : Select MANUAL/
AUTO or set One Shot AF mode to OFF, or select a speed rate between 2 and
12.
- White Balance : Set INDOOR/OUTDOOR/Manual(Red Gain, Blue Gain) as ap-
propriate.
- Exposure : Configure the settings for Brightness/Iris/Iris Level/SHUTTER Mode (Off,
Manual, A.FLK)/Shutter Speed, Sens-up Mode(Off,ON)/Sens-up Limit.
- BackLight : Select one from Off/WDR (WDR Level, WDR Limit)/User.
- Day / Night, AGC : Select one from Color/Black and White/Auto.
- Others : Set DNR (Off/Low/Middle/High)/XDR(Off/Low/Middle/High) as appropriate.
4. When done, click [Apply (
To configure the swing settings
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
1. Set <Mode> in <Sequence setup> to
<Swing>.
The menu screen will switch to the swing
setting screen.
2. Select a swing setting mode.
 Pan swing : You can set the swing
monitoring only using the PAN function.
 Tilt swing : You can set the swing
monitoring only using the Tilt function.
 Pan & Tilt swing : You can set the swing monitoring only using both PAN and Tilt
functions.
84_ setup screen
] button.
] button.
)].