To Undock The Omnibook - HP Docking System User Manual

4. Place the OmniBook on the docking system and firmly push toward the
docking pins until the docking system's motor pulls the computer into the
dock.

To undock the OmniBook

1. Make sure ac power is connected to the docking system—red status light will be
on.
2. Turn on the OmniBook (blue On/Off button).
3. If you're using Windows 95, go to step 4.
–or–
If you're using Windows for Workgroups, save your work and exit Windows.
You'll be rebooting the OmniBook.
4. Exit any applications that are using SCSI or network devices.
5. Press the Undock button on the docking system.
–or–
Undock button
If you're using Windows 95, you can instead select Eject PC from the Start
menu.
6. If you're using Windows for Workgroups, reboot the OmniBook after
undocking.
Using the Docking System
Understanding the Basics
1-11