Table of Contents
Advertisement
Security System Operation (cont'd)
To disarm the system when already in the premises:
SCREEN
24
ACTION
1. Press the DISARM button on the
"Armed" screen. The "User Authorization"
screen is displayed with the instructions
"To Disarm, Enter Code".
2. Enter your 4-digit user code.
If the Arm Multi-Partitions button on the
"Armed" screen is not checked, the
TouchCenter beeps once, the system will
disarm, and the "Arming" screen is
displayed showing the system as Ready
to Arm or Not Ready Fault if any zone is
faulted (open).
If the Arm Multi-Partitions button on the
"Armed" screen is checked, the Partition
No. & Description screen is displayed
listing the partitions to which you have
access.
3. Press the DISARM ALL button if you
wish to disarm the system. The
TouchCenter beeps once and the
"Arming" screen is displayed showing the
system as Ready to Arm or not ready if
any zone is faulted (open).
Note: If you wish to disarm only selected
partitions, you must first highlight the
partition(s) to be disarmed, then press the
DISARM SELECTED button. The
TouchCenter beeps once and the
"Arming" screen is displayed showing the
system as Ready to Arm or not ready if
any zone is faulted (open).
Advertisement
Table of Contents
