Hob - Daily Use; Hob - Helpful Hints And Tips - Zanussi ZCV662 User Manual

After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
To change the time, press
again until the indicator for the Time of
Day function flashes. You must not set the Du-
ration or End
Preheating
Set an oven function and maximum tempera-
ture and run an empty oven for 45 minutes, to

Hob - Daily use

Warning! Refer to the Safety chapters.
Heat settings
Control knob
0 Off position
Heat settings
1-6 (1 = lowest heat setting; 6=
highest heat setting)

Hob - Helpful hints and tips

Warning! Refer to the Safety chapters.
Cookware
• The bottom of the cookware must be
as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bottoms
can cause discoloration on glass ce-
ramic surface.
Energy saving
• If possible, always put the lids on the
cookware.
• Put cookware on a cooking zone be-
fore you start it.
• Stop the cooking zones before the end
of the cooking time to use residual
heat.
8
again and
function at the same time.
Function
burn off any residue from the cavity surface.
Accessories can become hotter than in normal
use. During this period an odour can be emit-
ted. This is normal. Make sure the room is well
ventilated.
Preheat the two ovens. Heat up one oven at a
time.
1. Turn the control knob to a necessary heat
setting.
2. To complete the cooking process, turn the
control knob to the "0" position.
Residual heat indicator
The residual heat indicator comes on when a
cooking zone is hot.
Warning! Risk of burns from residual
heat!
• The bottom of pans and cooking zones
must have the same dimension.
Examples of cooking applications
Heat set-
ting:
1
2
3
4
5
6 Bringing to the boil / quick frying /
Use to:
Keeping warm
Gentle simmering
Simmering
Frying / browning
Bringing to the boil
deep-frying
www.zanussi.com