What To Do If - Zanussi ZCV662 User Manual

Cooker
Hide thumbs Also See for ZCV662:
Table of Contents

Advertisement

2
1
To replace the glass panels obey the pro-
cedure in opposite sequence. Before you
lower the trim attach the A trim part to the
door. Refer to picture.
Oven lamp
Warning! There is a danger of electrical
shock!

What to do if...

Warning! Refer to the Safety chapters.
Problem
The hob does not operate
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle
on the food and in the oven cavity
The display shows "12.00"
18
A
Possible cause
The heat setting is not set
The oven is not switched on
The clock is not set
The necessary settings are not
set
The fuse in the fuse box is re-
leased
The oven lamp is defective
You left the dish in the oven for
too long
A power cut
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable
300°C heat-resistant oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
Set the heat setting
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Reset the clock
Remedy
www.zanussi.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zcv68300waZcv68300xaZcv68300ba

Table of Contents