Advertisement
CAUTION :
0Your new battery cartridge is not charged. You will need to charge it before use.
0
Do not keep the button pressed in with tape, etc. or the circuit will not function pro-
perly. Also, a malfunction o f the charger may result possibly causing overheating, etc.
0
If you try t o charge a cartridge from a just-operated tool, sometimes the charging light
will not come on. If this occurs, l e t the cartridge cool off for a while. Then re-insert it
and try t o charge
it
once more.
0
When you charge a new battery cartridge or a battery cartridge which has not been used
for a long period, it may not accept
a
full charge. This i s a normal condition and does
not indicate a problem. You can recharge the battery cartridge fully after discharging
it almost completely a couple of times.
0
If you wish t o charge two battery cartridges, allow 15 minutes between chargings on the
fast charger.
Safety system
Make sure all safety systems are in working
order before operation. The tool must not
operate if only the trigger i s pulled or if
only the safety lever is pressed against the
wood. It must work only when both ac-
tions are performed. Test for possible
faulty operation with a tool unloaded and
pointed well away from yourself or any
bystanders.
Trigger
Safety lever
NOTE :
There i s a possibility that the tool may operate for an instant when only the trigger is
pulled. This does not indicate a problem. If this occurs, point the tool well away from
yourself or any bystanders. Release and pull the trigger again t o make sure the safety
systems are in working order.
8
Advertisement
