Advertisement
Sight window
There is a convenient sight window on the
left side
of
the tool (when viewing the
tool
from the front).. Use this sight window t o
check i f there are staples in the magazine.
When staples are not visible through the
window, load staples into the magazine.
Sight window
/
Staples
0Handle the staples and their box carefully. If the staples have been handled roughly,
.Avoid storing the staples in a very humid or hot place or place exposed to direct sun-
0
Do
not attempt t o use staples that appear t o be damaged, bent, rusty or corroded.
they may be bent out of shape, causing poor staple feed or jamming.
light.
Set plate
Extra staples
This tool has a space for storing extra
staples. When you wish to store extra
staples
in this
space, pull
out the
set
plate
and insert them into the space as shown in
the figure
a t
right.
staples
into
this space.
CAUTION :
Always hold the tool with the set plate facing up to prevent the extra staples from falling
out when inserting or withdrawing the extra staples. Falling staples can present a danger
to anyone or anything below.
11
Advertisement
