Entering User Modes - HP L5006tm User Manual

Technical Specifications
Factory Preset Display Modes (Continued)
Preset Mode
11
12
13
14
15

Entering User Modes

The video controller signal may occasionally call for a mode that
is not preset if:
■
You are not using a standard graphics adapter.
■
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 15
factory preset, there are 7 user modes that can be entered and
stored.
The only condition to store as a user mode is the new display
information must have 1 KHz difference for horizontal frequency
or 1 Hz for vertical frequency or the sync signal polarities are
different from the default modes.
B–6
Resolution
MAC 832 x 624
75Hz
VESA 024 x 768
65Hz
SUN 1024 x 768
65Hz
VESA 1024 x
768 70Hz
VESA 1024 x
768 75Hz
Horz Freq (kHz)
49.72
48.36
52.45
56.48
60.02
Band Width (MHz)
57.283
65
70.49
75
78.75
User Guide