Identifying Monitor Conditions - HP L5006tm User Manual

Icon OSD Control Description
✎
When adjusting the Clock and Clock Phase values, if the monitor
images become distorted, continue adjusting the values until the
distortion disappears. To restore the factory settings, select the
Recall Defaults menu in the on-screen display.

Identifying Monitor Conditions

Special messages will appear on the monitor screen when
identifying the following monitor conditions:
■
Out of Range— Indicates the monitor does not support the
input signal because the resolution and/or refresh rate are set
higher than the monitor supports.
■
No Input Signal— Indicates the monitor is not receiving a
video signal from the PC on the monitor video input
connector. Check to determine if the PC or input signal
source is off or in the power saving mode.
■
Check Video Cable— Indicates the video cable is not
properly connected to the computer.
User Guide
OSD Language
Information
Description
OSD Menu
Selects from English, French, German,
Spanish and Japanese.
Indicates the current resolution,
H-Frequency and V-Frequency.
Operating the Monitor
4–7