Table of Contents
Advertisement
Main Menu
Table of Contents
Protecting Children
Installing a Rear-Facing Child Seat
with a Lap/Shoulder Belt
The lap/shoulder belts in the outer
back seats have a locking
mechanism that must be activated to
secure a child seat.
The following pages provide
instructions on how to secure a rear-
facing child seat with this type of
seat belt.
See page
32
for how to secure a rear-
facing child seat in the center back
seat with the lap belt.
For tips on installing a rear-facing
child seat with either type of seat
belt, see page
32
.
Driver and Passenger Safety
1. With the child seat in the desired
back seating position, route the
belt through the child seat
according to the seat maker's
instructions, then insert the latch
plate into the buckle.
2. To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor (you might hear a
clicking noise as the belt retracts).
3. After the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked and
you will need to repeat these steps.
Advertisement
Chapters
Table of Contents
