With A Tether - Honda 2005 Civic Owner's Manual

Main Menu Table of Contents
Installing a Child Seat
Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
COVER
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
40
Using an Outer Anchor
Front
TETHER
STRAP
HOOK
ANCHOR
1. After properly securing the child
seat (see page 38 ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
2. Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
3. Tighten the strap according to the
seat maker's instructions.
Using the Center Anchor
TETHER STRAP
HOOK
ANCHOR
1. After properly securing the child
seat (see page 38 ), route the
tether strap over the seat-back.
2. Follow steps 2 and 3 from the
previous column.