Install The Router - Cisco 1417 Quick Start Manual

Install the Router

A. Connect the router to the local network
Use the included yellow Ethernet cable for connecting the router to the local Ethernet network.
For more information on this cable, refer to the "Cabling Specifications" chapter in the
hardware installation guide that came with the router.
Step 1
Connect one end of the yellow Ethernet cable to the yellow ETHERNET port.
Step 2
Connect the other end to a port on the Ethernet hub or switch.
OK
FLASH PC CARD
Cisc o 1417
CONSO LE
ADSL
LNK
ETHER NET
Ethernet port
AU I
8
7
Straight-through
Ethernet cable
1
Ethernet hub or switch
3