Cisco 3600 Series Configuration Manual page 32

Voice over IP Configuration Examples
voice-port 1/0/1
!Configure the serial interface
interface serial 0/0
Configuration for Router SLC
hostname saltlake
!Configure pots dial peer 1
dial-peer voice 1 pots
!Configure pots dial peer 2
dial-peer voice 2 pots
!Configure voip dial peer 3
dial-peer voice 3 voip
!Configure the E&M interface
voice-port 1/0/0
voice-port 1/0/0
!Configure the serial interface
interface serial 0/0
Note
do not configure store and forward tone.
Note
DTMF signals.
VC-44 Voice, Video, and Home Applications Configuration Guide
signal immediate
operation 4-wire
type 2
description serial interface type dce (provides clock)
clock rate 2000000
ip address 172.16.1.123
no shutdown
destination-pattern 119....
port 1/0/0
destination-pattern 119....
port 1/0/1
destination-pattern 555....
session target ipv4:172.16.1.123
signal immediate
operation 4-wire
type 2
signal immediate
operation 4-wire
type 2
description serial interface type dte
ip address 172.16.65.182
no shutdown
PBXs should be configured to pass all DTMF signals to the router. We recommend that you
If you change the gain or the telephony port, make sure that the telephony port still accepts