Honeywell VisionPRO IAQ Product Data page 27

MON TUE WED
OK TO PICK MULTIPLE DAYS
FAN
Inside
AUTO
CANCEL
SYSTEM
PERIOD
EM HEAT
HEAT
OFF
AM
PM PM
COOL
AUTO
SCHED SCHED HOLD HOLD
DONE WAKE
6. The time, temperature(s) and fan setting disappear. The
bar above the selected period is removed, indicating the
scheduled period was cancelled.
NOTE: To reinstate a schedule period, press arrow keys to
set desired time and temperatures.
MON TUE WED
OK TO PICK MULTIPLE DAYS
FAN
DONE WAKE
7. Press Done key.
Fan Schedule
Press Fan key while in the Scheduling Screen to program the
System Fan. Choices available from the Scheduling Screen:
Auto (default position)—fan runs with equipment.
Programmable for all schedule periods (Wake, Leave, Return
and Sleep).
On—fan runs continuously (programmable for all schedule
periods).
Circ—fan runs randomly for approximately 35% of schedule
period (programmable for all schedule periods).
MON TUE
OK TO PICK MULTIPLE DAYS
FAN
Inside
AUTO
CANCEL
SYSTEM
PERIOD
EM HEAT
HEAT
OFF
COOL
AUTO
SCHED SCHED
DONE WAKE
THU FRI SAT SUN
SCREEN LOCKED
Set To
HEAT
Following
Schedule
COOL
CLOCK SCREEN
LEAVE RETURN SLEEP CANCEL
M22446
THU FRI SAT SUN
HEAT
COOL
LEAVE RETURN SLEEP CANCEL
M19957
WED THU FRI SAT SUN
SCREEN LOCKED
Set To
HEAT
Following
Schedule
AM
COOL
PM PM
HOLD HOLD CLOCK SCREEN
LEAVE RETURN SLEEP CANCEL
M22447
VISIONPRO
Fan Control
If the Fan program is scheduled, Auto is shown and any
programmable mode that is set; for example, if during Wake
period, Fan is set to Auto, only Auto is shown in the Fan area.
However, if during the Wake period, fan is scheduled to On,
both Auto and On are shown. Auto indicates fan is running its
schedule; On indicates Fan schedule is set to On.
FAN
Inside
ON
AUTO
SYSTEM
HEAT
COOL
SCHED
Table 10. Fan Program Operation and Screen Status.
Fan
Fan Program
Setting Schedule
Auto Auto
Auto On
Auto Circ
Auto Circ
Manual Override of Fan Schedule
Auto—fan is automatically following the Fan schedule (choices
are Auto, On or Circulate).
On—overrides Fan schedule. Fan is continuously On.
Circ—overrides Fan schedule. Fan circulates randomly for
approximately 35% of time until the Auto position is selected.
Table 11. Manual Override of Fan Schedule Operation.
Fan
Schedule
Fan Override
Setting Setting
Auto On
Auto Circ
Auto Circ
On a
Auto
On Circ
On Circ
Circ a
Auto
Circ On
a
Auto Override resumes the Fan Program in each schedule
period (Wake, Leave, Return and Sleep)
27
®
IAQ TOTAL HOME COMFORT SYSTEM
THU
Set
Following
Schedule
AM
Humidity
HOLD CLOCK SCREEN
Call
for Energize
Action Terminal
None None
Fan G
None None
Fan G
Call
for Energize
Action Terminal
Fan G
None None
Fan G
— —
None None
Fan G
— —
Fan G
M23505
Fan
Status
shown on
Screen
Auto
Auto/On
Auto/Circ
Auto/Circ
Screen
Message
Under
Fan
Setting
On
Circ
Circ
—
Circ
Circ
—
On
68-0287—1