Supplied installation components
Installing your fridge freezer
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
5) Cut the sealing strip so that is the same height as the height of the
aperture.
a)
Top fixing bar
b)
Sealing strip
c)
Door slider
d)
Door guide
e)
Fixing screws (Ø4 x 17)
f)
Fixing screws (Ø4.2 x 9.5)
g)
Central support bracket
4) Insert the top fixing bar
(a) into the slot on the top of
the appliance. Use the Ø4.2 x
9.5 fixing screws (f) to fit the
fixing bar to the top of the
appliance.
o Pass
cable through to the
back
aperture.
allow the appliance
to be easily plugged
in, once you have
completed the rest
of the installation.
the
power
of
the
This
will
23