Honda 08A03-5E1-001 Installation Instructions Manual page 11

25. If you are installing an in-dash CD changer;
remove the shipping bracket.
SHIPPING
BRACKET
(Discard.)
IN-DASH CD
CHANGER
26 . Place the cassette/MP3 player or in-dash CD
changer under the audio unit, and attach the left
and right audio unit brackets to the player and the
audio unit using the four washer-screws removed
in step 11, and the four 5 x 8 mm washer-screws
included the cassette/MP3 player or in-dash CD
changer.
5 x 8 mm WASHER-
WASHER-
SCREW
SCREW
(Included with the
(Remove in
player or in-dash CD
step 11.)
changer.)
LEFT
AUDIO
BRACKET
CASSETTE/MP3
PLAYER or IN-DASH
CD CHANGER
Insert the bolts
through the lower
holes.
©
2005 American Honda Motor Co., Inc. - All Rights Reserved.
2506020T
WASHER-
SCREW
(Removed in
AUDIO UNIT
step 11.)
5 x 8 mm
WASHER-
SCREW
(Included with
the player or
in-dash CD
RIGHT
changer.)
AUDIO
BRACKET
5715020Y
All 30487-31491 (0511)
27. Fold one bus cable in half, and secure it to the
vehicle 20-pin connector harness with one bus
cable end 30 mm from the 20-pin connector, and
the other bus cable end 120 mm from the 20-pin
connector.
BUS CABLE
(Fold in half.)
VEHICLE
HARNESS
30 mm
120 mm
AUDIO
VEHICLE 20-PIN
PANEL
CONNECTOR
OPENING
28. Bundle up the excess bus cable you folded in half
and secure it to the vehicle harness with one wire
tie.
WIRE TIE
VEHICLE
HARNESS
BUS CABLE
CASSETTE / MP3
PLAYER OR IN-DASH
CD CHANGER
BUS CABLE
WIRE TIE
14-PIN CONNECTOR
AUDIO UNIT
BUS CABLE
14-PIN CONNECTOR
5426020Y
AUDIO PANEL
OPENING
5426030Y
11 of 13