Operation Procedure; Turning Power On To Listen To Music - Honda Digital Audio System for Motorcycle Owner's Manual

OPERATION PROCEDURE

Turning power ON to listen to music.

Connect the digital audio system to the portable audio unit with the sub cord.
1
SUB CORD
Turn the portable audio unit ON that is connected to the digital audio system.
Start the engine and push the amplifier unit POWER button.
2
Push the VOLUME button to adjust the sound level to your preference.
3
ADVICE
• After connecting the portable audio unit to the digital audio system, position it in a
place on your motorcycle so it does not interfere with safe riding.
12
STEREO MINI JACK TERMINAL
OF PORTABLE AUDIO UNIT. etc.
(ø3.5 mm 3-pin terminal, e.g.
headphone terminal, etc.)
POWER LIGHT
The light should come ON.
The amplifier unit emits a "beep" each
time the VOLUME button is pushed,
but there is no "beep" when the
volume is at minimum or maximum.
The amplifier unit emits the "beep"
twice when the VOLUME button is
pushed and held (approx. 2
seconds.) The sound level changes
UP
continuously while pushing and
DOWN
holding the VOLUME button.