Honda RSX 2005 Owner's Manual page 178

Main Menu Table of Contents
Replacing a High-mount Brake
Light Bulb
BULB
COVER
1. Open the hatch.
2. Remove the high-mount brake
light cover by pivoting it toward
the back of the vehicle.
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the high-mount brake
light cover.
Replacing Rear Bulbs
COVER
1. Open the hatch. Remove the light
assembly cover by pulling on the
tab on the outside edge.
Lights
CONTINUED
177