Table of Contents
Advertisement
7. Throttle Control and Choke Control
Choke Control
The choke control is used for cold starts to
provide the engine with a richer fuel mixture.
The choke control is combined with the
Throttle control. To engage the choke, the
throttle control is moved past the max rpm
setting to its choke position.
Do not use the choke when starting a warm
engine.
Throttle Control
The throttle control regulates the engine
speed and thereby the rate of rotation of the
blades, assuming the control for engaging the
mower deck is pulled forward, see "8. Blade
Engagement Lever" on page 18.
In order to increase or decrease the engine
speed, the control is moved forward or
backward respectively.
Avoid idling the engine for long periods, as
there is a risk of the spark plugs fouling.
USE FULL THROTTLE WHEN MOWING, for
best mower performance.
8. Blade Engagement Lever
The blade engagement lever is on the left
support by the control panel.
In order to engage the blades, push the lever
forward. The blades are disengaged when
the lever is pulled backward.
The blade engagement lever needs to be
adjusted so the lever does not come in
contact with control panel when the lever is in
the off position.
18
English-
CONTROLS
Choke control
Throttle control
Blade engagement lever
8011-682
8011-682
8011-474
Advertisement
Table of Contents
