Advertisement
Elegant, simple,
convenient —
a pleasure to use
Mounting Flexibility
Mounting the DPX-1100 is easy and versatile.
Lens-to-screen distance can be anywhere
from 9 ft. 10 in. to 15 ft. 9 in. (100" screen)
thanks to the powerful 1.6x zoom lens.
Motorized vertical lens shift is ±50% of
projection height , so the projector can be
used at any height between the top and
bottom of the screen. Iris, zoom and focus
adjustments are also motorized.
Six Memory Settings
There are six memory positions each of which
can store different combinations of
parameter settings, depending on the source.
The projector automatically adjusts when the
source is changed, so you do not have to
select a different memory position.
Lamp Power Selector
The multi-step Lamp Power Selector makes it
possible to adjust for optimum brightness
and contrast with different levels of room
lighting and video sources. It can also be used
to extend lamp life (at 80% brightness, lamp
life goes from 2,000 to 2,500 hours).
Extensive Menus Plus Handy
One-Line Menu
The DPX-1100 has an extensive range of menus,
viewable on-screen and managed via the
remote control. There are four main menu
groups (Image, Signal, Initial and Setup), each
offering a wide range of adjustable parameters,
some of which have submenus. In addition, a
one-line menu can be superimposed on the
screen while viewing a movie or other source,
for "fine-tuning" the image as you watch.
Custom Installation Solutions
The DPX-1100 facilitates custom installation
with an RS-232C interface, IR control in/out
ports for using an optional wired connection
to the IR remote control, front and rear IR
sensors and a powerful DC12V, max. 200mA
trigger out with selectable trigger timing.
Silent Operation
The DPX-1100 runs with the quiet efficiency
you expect from a high quality home theater
projector. It uses effective DMD and power
supply ducting, while minimizing cooling fan
operation by continually adjusting it in
accordance with picture brightness.
HDMI Terminal
Most high-end projectors
provide DVI connection, but
the DPX-1100 goes further with an HDMI
connection. HDMI can handle digital signals
like DVI, and a variety of other information as
well, such as component type, scan status
and colorimetry, which can be adjusted.
Full-Function Remote Control
The remote control unit gives you total
control over all of the projector's functions
and settings. It is designed for easy gripping
and use, and can be pointed at either the
front or the back of the projector, from as far
as 7m (23 feet) away.
Digital Cinema Projector
Control Panel
Other Convenient Functions
• Smart Zoom for projecting 4:3 broadcasts onto a full
16:9 screen with no distortion in the middle
• Cinema Zoom with Zoom Up and Zoom Out for
eliminating bars on the top and
bottom of the 16:9 screen
• Selectable video scan (100% or 94%)
• Automatic aspect conversion
• Manual display aspect selection
(8 modes)
• Still (freeze frame) function
• Operation status lock
• Test pattern selection
• Message display keeps you informed
of operating status
• Four warning indicators (lamp, cover,
temperature, fan)
In addition to the Input A and Input B (Component Video and RGB
signal) terminals, the DPX-1100 rear panel offers an HDMI input
terminal, composite video input terminals, D4 video input
terminal, remote in/out terminal, and RS-232C and Trigger out
(12V/200mA) terminals.
DPX-1100 Main Specifications
• Projection System Digital Light Processing (DLP)™ Technology
• Device Type Size: 0.8 inch DMD™ HD2+ x1 Pixel 1,280 x 720
• Projection Lens F=2.7 - 5.0, f=24.3 - 38.9mm Functions Zoom
(Motorized): x1.6; Focus (Motorized); Lens Shift (Motorized): Vertical
Up/Down 50%; Iris (Motorized): 3-Step Projection Ratio 1.355-2.168
(3.0 - 4.8m, 100" 16:9) Screen Size 60 - 200 inch (16:9) • Lamp 270W
SHP, 2,000 hours • Brightness 800 ANSI lumens (White Boost: On,
Iris: Off), 400 ANSI lumens (White Boost: On, Iris: Fully On) • Contrast
Ratio 4,000:1 (White Boost: On, Iris: Fully On), 2,000:1 (White Boost:
On, Iris: Off) • Color Format NTSC, PAL, SECAM, NTSC4.43, PAL-M,
PAL-N, PAL60 • Scan Frequency Horizontal: 15-8 kHz Vertical: 50-85
Hz (Analog), 60 Hz/50 Hz (Digital) • Power Consumption 375 W
(Standby: 0.1 W) • Dimensions (W x H x D) 495 x 189.5 x 465.4 mm;
19-1/2" x 7-7/16" x 18-5/16" • Weight 13.8 kg; 30.4 lbs.
1100
DPX-
5
Advertisement
