Ip Standard Access List Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Edit button to re-configure the specific entry.
Click the Clear button to delete the information in the Description.

IP Standard Access List Settings

This window is used to create an access list used to filter routes.
To view the following window, click L3 Features > IP Route Filter > IP Standard Access List Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Access List Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
The fields that can be configured are described below:
Parameter
Direction
Access Address
Access Mask
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Figure 6-174 IP Standard Access List Settings window
Description
Enter the name of the access list.
Figure 6-175 IP Standard Access List Settings - View Detail window
Description
Use the drop-down menu to Permit or Deny the specified network.
Enter the network address.
Enter the mask address of the network address.
304