Configuring An Snmp V3 User Profile; Figure 2. Web Interface Panel-Example; Figure 3. Configuring An Snmp V3 User Profile - D-Link DWS-3000 Series Configuration Manual
Unified wired & wireless access system
Hide thumbs
Also See for DWS-3000 Series:
- User manual (266 pages) ,
- Deployment manual (7 pages) ,
- Configuration manual (61 pages)
Table of Contents
Advertisement
2
Using the Web Interface
Figure 2. Web Interface Panel-Example
Configuring an SNMP V3 User Profile
Configuring an SNMP V3 user profile is a part of user configuration. Any user can connect to
the switch using the SNMPv3 protocol, but for authentication and encryption, additional steps
are needed. Use the following steps to configure an SNMP V3 new user profile.
Configuring an SNMP V3 User Profile
Figure 3.
1. From the LAN navigation menu, select LAN> Administration> User Accounts (see
Figure 3).
Starting the Web Interface
29
Advertisement
Table of Contents
