Appendix Eietf Radius Attributes Support - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Appendix E
Remote Authentication Dial-In User Service (RADIUS) attributes carry specific authentication, authorization,
information and configuration details for the request and reply. This appendix lists the RADIUS attributes currently
supported by the switch.
RADIUS attributes are supported by the IETF standard and Vendor-Specific Attribute (VSA). VSA allows the
vendor to create an additionally owned RADIUS attribute. For more information about D-Link VSA, refer to
Appendix E RADIUS Attributes Assignment.
IETF standard RADIUS attributes are defined in the RFC 2865 Remote Authentication Dial-In User Service
(RADIUS), RFC 2866 RADIUS Accounting, RFC 2868 RADIUS Attributes for Tunnel Protocol Support, and RFC
2869 RADIUS Extensions.
The following table lists the IETF RADIUS attributes supported by the D-Link switch.
1. RADIUS Authentication Attributes
Number
1
2
3
4
5
6
7
8
12
18
24
26
27
29
30
31
32
60
61
64
65
77
79
80
81
85
87
IETF RADIUS Attributes Support
IETF Attribute
User-Name
User-Password
CHAP-Password
NAS-IP-Address
NAS-Port
Service-Type
Framed-Protocol
Framed-IP-Address
Framed-MTU
Reply-Message
State
Vendor-Specific
Session-Timeout
Termination-Action
Called-Station-ID
Calling-Station-ID
NAS-Identifier
CHAP-Challenge
NAS-Port-Type
Tunnel-Type
Tunnel-Medium-Type
Connect-Info
EAP-Message
Message-Authenticator
Tunnel-Private-Group-ID
Acct-Interim-Interval
NAS-Port-ID
498