Troubleshooting - Honeywell Enviracaire Elite HE225A Product Data

HE225A,B AND HE265A,B BYPASS FLOW-THROUGH HUMIDIFIERS

TROUBLESHOOTING

Refer to Table 7 for troubleshooting procedures.
Problem
Low humidity
High humidity
68-0244-1
Table 7. Troubleshooting Procedures.
What To Look For
Furnace blower not operating
Rapid air changes. Drafts (cold
air is dry and is an added load to
the humidifier).
Condensation on walls.
Heavy condensation on
windows.
8
What To Do
• Reset circuit breaker or check for blown fuse.
• Check that the furnace power is on.
• Check all external wiring connections.
• Check the humidity control setting.
• Call a professional heating contractor.
• Keep doors and windows closed.
• Close fireplace damper when not in use.
• Keep exhaust fan running time to a minimum.
• Seal around doors and windows.
• Turn humidity control and water off until condensation
is completely evaporated.
• Turn humidity control down low enough to eliminate
condensation caused by moisture from bathing,
mopping, cooking, etc. If moisture persists, more
ventilation is needed.