Set Clock; Store Radio Stations Automatically - Philips DTB3185 User Manual

3
Close the battery compartment.
Note
•
If you are not going to use the remote control for a
long time, remove the battery.
•
Batteries contain chemical substances, so they should
be disposed of properly.

Set clock

Note
•
You can set the clock in standby mode only.
1
In standby mode, press and hold CLOCK
to activate the clock setting mode.
2
Press PRESET/ALBUM
hour or 24 hour format.
3
Press CLOCK to confirm.
» The hour digits begin to blink.
10 EN
/ to select 12
4
Press PRESET/ALBUM
hour.
5
Press CLOCK to confirm.
» The minute digits begin to blink.
6
Press PRESET/ALBUM
minute.
7
Press CLOCK to confirm.
Note
•
You can also press VOL -/+ on remote control or main
unit to set hour format/hour/minute.
•
To exit clock setting mode without storing, press
/MENU.
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can press CLOCK to view the clock in any source
mode.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press CD/FM/DAB+ repeatedly to select
the FM tuner source.
» [AUTO INSTALL -- PRESS PLAY --
STOP CANCEL] (press
automatic installation, or press
cancel) is displayed.
3
Press .
» The unit automatically stores FM radio
stations with sufficient signal strength.
» After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
/ to set the
/ to set the
to start
to