Step 4: Connecting The Audio Cords - Sony DVP-NS355 Service Manual

B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480p) format signals, you must use this connection and set NORMAL/PROGRESSIVE switch
to PROGRESSIVE (page 66). The PROGRESSIVE indicator lights up when the player outputs
progressive signals.
Green
Blue
Red
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 65.
Notes
• Connect the player directly to the TV. If you pass the player signals via the VCR, etc., you may not receive
a clear image on the TV screen.
CD/DVD player
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it
is recommended that the user switch the connection to the 'standard definition' output. If there are questions
regarding our TV set compatibility with this model 480p DVD player, please contact our customer service
center.
Connecting to your TV
A
This connection will use your TV's speakers for sound.
CD/DVD player
Y P P LINE OUT
COMPONENT B R
VIDEO OUT VIDEO
NORMAL
PCM/DTS/ PROGRESSIVE
DOLBY DIGITAL
COAXIAL R AUDIO L
DIGITAL OUT LINE OUT S VIDEO OUT
A
(yellow)*
R AUDIO L
(white)
LINE OUT
(red)
Audio/video
cord (supplied)
to LINE OUT L/R
(AUDIO)
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV's audio
input jack.
, P )
B R
Green
Blue
Red
VCR
TV
Connect
directly
19
TV
(yellow)*
(white)
(red)
to audio input
,
21

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
Stereo amplifier (receiver) and two speakers
or
MD deck/DAT deck
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
D
20
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
Y P P
B R
COMPONENT
VIDEO OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL R AUDIO L
DIGITAL OUT LINE OUT
B-2
Coaxial digital
cord (not
supplied)
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL)
to coaxial
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
22
1-4
through .
A D
Connection Your setup (example)
(page 21)
A
(page 22)
B
(page 23)
C
(page 24)
D
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
. If the amplifier
B-1
LINE OUT
VIDEO
NORMAL
PROGRESSIVE
S VIDEO OUT
Stereo audio cord
(not supplied)
(red)
or
R
LINE OUT
(white)
to LINE OUT L/R (AUDIO)
(white) (red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
.
B-2
B-1
AUDIO L