Step 4: Connecting The Audio Cords - Sony DVP-K380 Operating Instructions Manual

Cd/dvd player

Table of Contents

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read

the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,

Components to be connected

• Surround effects: TVS DYNAMIC (page 51),

TVS WIDE (page 51)

Stereo amplifier (receiver) and two speakers

• Surround effects: TVS STANDARD (page 51)

MD deck/DAT deck

• Surround effects: TVS STANDARD (page 51)

AV amplifier (receiver) having a Dolby*

Surround (Pro Logic) decoder and 3 to 6

speakers

• Surround effects: Dolby Surround (Pro Logic)

(page 73)

AV amplifier (receiver) with a digital input jack

having a Dolby Digital, MPEG audio, or DTS**

decoder and 6 speakers

• Surround effects:

—Dolby Digital (5.1ch) (page 73)

—DTS (5.1ch) (page 73)

—MPEG audio (5.1 ch) (page 73)

* Manufactured under license from Dolby

Laboratories. "Dolby," "Pro Logic," and the

double-D symbol are trademarks of Dolby

Laboratories.

** "DTS" and "DTS Digital Out" are trademarks

of Digital Theater Systems, Inc.

through

Connection

(page 19)

(page 20)

(page 21)

(page 22)

Your setup

example

Table of Contents