Summary of Contents for Honeywell TROL-A-TEMP 69-1496
Page 1
Electronic Thermostat Room OWNER’S GUIDE SYSTEM Cool Off Heat Auto On M14752 69-1496 69-1496...
Page 2
Congratulations on the purchase of your new thermostat! Over 100 years of Honeywell engineering expertise went into the making of this thermostat in an effort to provide you with a more comfortable and convenient living environment. • Simple and easy to use . The easy for you to change your temperature setting.
Settings Setting FAN and SYSTEM Switches Fan and system settings are controlled by using FAN and SYSTEM switches located on the bottom of the thermostat case. First set the FAN switch: Auto: Normal setting for most homes. In cooling, the fan goes off and on with the cooling equipment.
Page 4
Normal setting for months when your home needs heating. Digital display shows a flame when heating is on. IMPORTANT Do not operate the Thermostat in cooling mode when the outdoor temperature is below 50 F (10 C), or damage to compressor could result. 69-1496 when cooling is on.
Page 5
Displaying Temperature Setting NOTE: Your temperature setting can be set anywhere from 40 to 99 F (5 to 37 C). The temperature setting and the room temperature are shown separately on the digital display. The indicator points to Set when the temperature setting is displayed and to Room when the room temperature is displayed.
Changing Temperature Setting 1. To lower the temperature setting, press the When in the heating mode, lowering the temperature at night or during the day can lower your energy costs. 2. To raise the temperature setting, press the When in the cooling mode, raising the temperature before you leave for work or school also lowers your energy costs.
Heating or cooling does not come on. • Check power to the heating or cooling equipment. For compressor protection, on initial startup, and during power interruptions the Thermostat will go into a 5 minute delay. During this delay, the cooling icon, a snowflake , will flash.
Page 8
• Check that the SYSTEM switch on the thermostat is set to Heat or Cool. • Check the system fuse or circuit breaker and replace or reset if necessary. • Check for air movement at the register. Temperature setting is too warm or cool •...
Page 9
If you have questions concerning this thermostat, call Honeywell Customer Relations at 1-800-468-1502, Monday-Friday, 7:00 am-5:30 pm, Central time. For service, contact your local heating and cooling contractor: 69-1496...