Main Menu - Philips 13PT30L1 Service Manual

6. To change the value of a highlighted SAM menu item (AKB or VSD), use the Menu Left or Menu Right keys
on the remote control.
7. To enter a highlighted SAM sub menu, use the Menu Left or Menu Right keys.
After entering the sub menu, use the Menu Up or Menu Down to select an item within the sub menu.
Use the Menu Left or Menu Right keys to change the value of the selected item.
Press the Menu button to return to the top level SAM menu.
8. Press the Menu button on the remote control while in SAM to switch the software to a Virtual Customer
Mode; the text "SAM" will still be displayed in the upper right corner of the screen. In this mode, all customer
menu adjustments to the set can be made. From the Virtual Customer Mode, press the Menu button to
return to the SAM Menu.
9. Press the Status button on the remote control to toggle the OSD (except "SAM") ON and OFF.
10. To exit the Service Alignment Mode, turn the set off with the Power button on the remote control. To turn off
the set without exiting SAM (or erasing any stored error codes), unplug the ac cord. When the set is
powered on again, the Service Alignment Mode will still be active.
Note: When SAM is exited or a power interrupt occurs, the volatile SAM items AKB, VSD, AFW, and SBL
will be reset to their original values.

Main Menu

The SAM main menu contains the following items:
AKB
VSD
Tuner sub menu
White Tone sub menu
Geometry sub menu
Audio sub menu (on stereo chassis)
Menu: MAIN
AKB Black current loop
(Auto Kine Bias)
VSD Vertical scan
disable
TUNER
WHITE TONE
GEOMETRY
AUDIO
Values Remarks
OFF/ON (0/1)
OFF/ON (0/1)
>
>
>
> Available only on stereo chassis