Chapter 4 - Configuration; How To Access The Web-Based Configuration Utility - Buffalo Nfiniti WBMR-HP-G300H User Manual

Chapter 4 - Configuration

The web-based configuration tool lets you change advanced settings for the AirStation. Don't
change these settings unless you know what you're doing.

How to Access the Web-Based Configuration Utility

To configure the AirStation's advanced settings manually, log in to the web-based configuration
utility as shown below.
1
Launch a web browser.
2
Note: · The AirStation's default LAN-side IP address is 192.168.11.1.
· If you changed the IP address of the AirStation, then use the new IP address.
3
WBMR-HP-G300H User Manual
Enter the AirStation's LAN-side IP address in the
address field, and press the [Enter] key.
When this screen appears, enter [root]
(in lower case) for the user name and the
password that you set during initial setup.
Click [OK].
Note: · By default, the password is blank (not set).
· If you forget your password, hold down
the Reset button (page 11) to initialize all
settings. The password will then be blank.
Note that all other settings will also revert to
their default values.
18