Programming - Honeywell T8196A/Q682A Owner's Manual

Programming

You can program your thermostat to
automatically lower and raise the temperature
one or more times every 24 hours.
Before Setting Your Program
Lift thermostat flip-up cover and you'll find
the 24-hour program dial. The slots on the
program dial (Fig. 4) are for the program pins
which can be inserted at ten-minute intervals.
Three red and three blue program pins are
included with your thermostat. The red pins
start the high-temperature period; the blue pins
start the low-temperature period. A heating
program was preprogrammed. A red pin is
inserted at 6:00 AM for high temperature
(comfort period); a blue pin is inserted at
10:00 PM for low temperature (energy saving
period). Two additional sets of pins are located
in the program pin storage area.
24-HOUR PROGRAM DIAL
(GRAY AREA FOR NIGHT SETTINGS)
FLIP-UP
COVER
PROGRAM
PINS
THERMOSTAT
COVER
PROGRAM
PIN SLOT
PROGRAM INDEX WHEEL
TIME INDICATOR ARROW
Fig. 4—Program components.
9
PROGRAM
PIN STORAGE
M7348
69-0636—1