Internet Access - Draytek Vigor 3200 Series User Manual

Active Mode
After finished the above settings, click OK to save the settings.
4 . 1 . 3 I n t e r n e t A c c
4 . 1 . 3 I n t e r n e t A c c
For the router supports multi-WAN function, the users can set different WAN settings (for
WAN1/WAN2/WAN3/WAN4/WAN5) for Internet Access. Due to different Physical Mode of
WAN interface, the Access Mode for these connections also varies. Refer to the following
figures.
Determine the WAN interface will be active for always
(Always On) or be treated as a backup WAN interface
(Backup).
Backup Type - Determine the role of such WAN interface. It
will be changed according to the Active Mode specified.
If you choose Always On as Active Mode, such interface
will be used for access into Internet all the time.
If you choose Backup as the Active Mode, you have to
specify which WAN interface will be selected to backup
multiple WANs. However, ignore this setting if you want to
backup a single WAN.
When any WAN disconnect – WAN1 will be activated
when any WAN interface disconnects.
When all WAN disconnect – WAN1 will be activated when
all the WAN interfaces disconnect.
e s s
e s s
107 Vigor3200 Series User's Guide