Display Panel; Opening The Display Panel; Using The System As A Tablet - Fujitsu LifeBook T901 Series User Manual

Display Panel Latch

Display Panel

Your LifeBook T901 Series Tablet PC contains a
display panel that is backlit for easier viewing in
bright environments. The convertible design of
your Tablet PC allows you to open the display
fully, rotate it 180 degrees, and lay it face up
on the keyboard. This allows you to use the
system as a tablet, much as you would use a
pad of paper.

Opening the Display Panel

1. Press the latch release button. This releases
the locking mechanism. While holding the latch
release, lift display cover.
2. Lift the display backwards, being careful not
to touch the screen, until it is at a comfortable
viewing angle. (Figure 2-10)

Using the System as a Tablet

If you would like to use the system as a tablet,
perform the following steps.
Rotate the system display only in the
direction indicated in the procedure.
Turning the display in the incorrect
direction could cause hinge damage.
In the following step, be sure to position
the display perpendicular to the keyboard,
otherwise the keyboard or display cover
could get scratched.
20
Latch Release Button
Figure 2-10. Opening the display
1. Lift the display until it is perpendicular to the
keyboard. (Figure 2-12)
2. When the display is perpendicular to the
keyboard, rotate it 180 degrees in either
direction (Figure 2-13) so that it is facing
backwards. (Figure 2-14)
3. Holding the top edge of the display panel,
pull it forward until it is lying nearly atop the
keyboard.
4. Push the latch towards the display (See "A"
in Figure 2-11) . The latch will pivot so the
top latch disappears, and the bottom latch
appears (See "B" in Figure 2-11) . Holding the
latch down, lay the display fl ush against the
system so that the latch engages. You can now
use your system as a tablet. (Figure 2-15)
Top latch
Bottom latch
Figure 2-11. Latching/Unlatching
Display Side