Getting Started; Securing The Tv; Tv Front And Rear Panels - Sony Trinitron KV-TG21M61 Service Manual

A

Getting Started

Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old batteries nor use different types of batteries
together.
Step 2
Connect the antenna cable (not supplied) to 8 at the
rear of the TV.
Tip
• You can also connect your TV to other optional components.
(See E)
Step 3
Plug in the power cord, then press ! on the TV to
turn it on.
Step 4
SELECT
Press SELECT and PROGR + on the TV at the same time
for one to two seconds to preset the channels
automatically. (See J)
PROGR
Tip
• To stop the automatic channel presetting, press SELECT twice.
SELECT Step 5
Press SELECT on the remote until "LANGUAGE/
ENGLISH" appears on the screen, then press + or – to
change the on-sceen display language.
B
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 220 – 240 V AC.
• Do not plug in the power cord until you have completed making all other connections;
otherwise a minimum leakage current might flow through the antenna and other terminals to
ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if
you are not going to use it for several days. If any liquid that leaks from the batteries touches
you, immediately wash it away with water.
For your own safety, do not touch any part of the For children's safety, do not leave children alone
TV, the power cord and the antenna cable during with the TV. Do not allow children to climb onto
lightning storms. it.
Do not operate the TV if any liquid or solid object
To prevent fire or shock hazard, do not expose the falls into it. Have it checked immediately by
TV to rain or moisture. qualified personnel only.
Do not block the ventilation openings of the TV. Clean the TV with a dry and soft cloth. Do not
Do not install the TV in a confined space, such as use benzine, thinner, or any other chemicals to
a bookcase or built-in cabinet. clean the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the Your TV is recommended for home use only.
TV as high voltages and other hazards are present
Do not use the TV in any vehicle or where it may
inside the TV. Refer servicing and disposal of the
be subject to excessive dust, heat, moisture or
TV to qualified personnel. vibrations.
WARNING (continued)
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
Do not install the TV in an unstable position.
Use a proper TV stand.
C

Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
3.8 mm
screws
:
Note
• Use only the supplied screws. Use of other screws may damage the TV.
D

TV front and rear panels

TV front panel
(MONO)
L R
#
9 8
Button
1 !
2
3 1
3
3
4 PROGR +/–
5
2 +/– *
6
t
7
SELECT
8 i
9 , qa t
0
8
qs T
* You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote.
#
The R (audio input) jacks are only available for KV-TG21 only.
– 7 –
KV-TG21M61/TG21M90
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Do not place any objects on the TV.
20 mm
clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
or
(1) Put a cord or chain through the
clamps.
(2) Screw one clamp to a wall or pillar
and the other clamp to the provided
hole at the rear of your TV.
TV rear panel
0
R L(MONO)
#
qs
SELECT
PROGR
7 6 5 4 3 2 1
Function
Turn off completely or turn on the TV.
Remote control sensor.
Standby indicator.
Stereo/bilingual indicator.
Wake Up indicator.
Select program number.
Adjust volume.
Select TV or video input.
Select the desired item.
Headphone terminal.
Video input terminal.
Antenna terminal.
Monitor output terminal.
RM-952
qa
!