Honeywell CHRONOTHERM IV DELUXE T8624D Product Data page 13

Setting the Current Day and Time
IMPORTANT
Always press the keys with your fingertip or similar
blunt tool. Sharp instruments like pens and pencil
points can damage the keyboard.
1. Press Set Current Day/Time.
NOTE: On initial power up or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
Time Set Program
Set Current
Run Set Current
Wake Leave Return
Program Day/Time
Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday, Tue=Tuesday,
Wed=Wednesday, Thu=Thursday, Fri=Friday,
Sat=Saturday.
Time Set Program
Set Current
Run
Wake Leave Return
Program Day/Time
Day
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
3. Press Time or Time
is displayed.
NOTE: Tapping the Set Current Day/Time will change
the time in one hour increments.
Time
Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Heat/Cool
Hold Temp
Day System
Settings
Daylight Copy
Time
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Time Set Program
Daylight
Run Set Current
Wake Leave Return
Program Day/Time
Time
Heat/Cool
Hold Temp
Day Settings System
Daylight Copy
Time
4. Press Run Program.
Run Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Program
Heat/Cool
Hold Temp System
Day Settings
Daylight Copy
Time
T8624D CHRONOTHERM
Set Day/Time
PM
Mon
Sleep
Fan
M10312
Set Day/Time
PM
Tue
Sleep
Fan
M10313
until the current time
Set Day/Time
AM
Tue
Sleep
Fan
M10314
Set Day/Time
AM
Tue
Sleep
DST
Fan
M10315
AM
Room
Tue
Sleep
Wake
System DST Fan
Fan
Heat Auto
M10316
®
IV DELUXE PROGRAMMABLE THERMOSTAT
Programming the First Day
Start by programming the Wake time and temperature (and
fan operation on select models) for any one day:
1. Press Wake.
Time Set Program
Run Set Current
Wake Leave
Program Day/Time
Wake
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
2. Press Day until the desired day is displayed.
Time Set Program
Run Set Current
Wake Leave
Program Day/Time
Day
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
3. Press Time or Time
is displayed.
NOTE: The program times are in fifteen minute
intervals. (Example: 8:00, 8:15, 8:30).
Time
Time Set Program
Run Set Current
Wake Leave
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
4. Press increase or decrease
Wake temperature is displayed.
NOTE: The setpoint temperature range is 40 to 90°F
(7 to 31°C) for heating and 45 to 99°F
(9 to 37°C) for cooling.
Time Set Program
Run Set Current
Wake Leave
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
NOTE: Press Fan to modify fan operation. Auto
means the fan will run only when the heating
or cooling equipment is operating. On means
the fan will run continuously for the entire
period.
13
Set Program Start Time Setting
AM
Heat
Tue
Return Sleep
Wake
System Fan
System Fan
Heat
M10317
Setting
Set Program Start Time
AM
Mon Heat
Return Sleep
Wake
System Fan
System Fan
Heat
M10318
until the desired Wake time
Setting
Set Program Start Time
AM
Mon Heat
Return Sleep
Wake
System Fan
System Fan
Heat
M10319
key until the desired
Setting
Set Program Start Time
AM
Mon Heat
Return Sleep
Wake
System Fan
System Fan
Heat
M10320
68-0166—1
Auto
Auto
Auto
Auto