Related Manuals for Honeywell HZC-855NX Series
Summary of Contents for Honeywell HZC-855NX Series
- Page 1 OPERATION MANUAL Built-in x35 ZOOM / High Resolution AUTO FOCUS CAMERA HZC-855NX/PX Series READ AND KEEP THIS OPERATION MANUAL...
- Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Indicate a potentially hazardous situation which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, I.e., in strict accordance with the instruction manual, may cause harmful interference to radio communications.
- Page 3 CAUTION FOR SAFE OPERATION 1. Water and Moisture To prevent fire or shock hazard, do not expose this camera to rain or moisture. 2. Servicing Do not attempt to disassemble or repair by yourself. You may be exposed to dangerous voltage or other hazards. Note that all servicing is qualified service personnel.
-
Page 4: Table Of Contents
CONTENTS 1. Features --------------------------------------------------------------- 5 2. Terms & Functions ------------------------------------------------ 6 3. Installation ------------------------------------------------------------ 7 4. Camera Control Methods ------------------------------------------- 8 5. On Screen Display -------------------------------------------------- 10 6. Specifications --------------------------------------------------------- 21 7. Dimensions ------------------------------------------------------------ 22 Thank you for using our Auto Focus Zoom Color Camera. To get the best efficiency, read carefully all instructions in this manual before use, and keep this manual for reference. -
Page 5: Features
1. Features Ideal Digital Video Camera for Security The HZC-855NX/PX Ser. is a compact camera that offers easy system integration. Coming with the built-in zoom lens, the user can monitor the scene from variable angle without the extra lens. With the DSP technology, such intelligent controls as auto iris, and auto white balance are possible to realize clear detailed picture. -
Page 6: Terms & Functions
2. Terms & Functions FAR(-) BUTTON TELE(UP) BUTTON NEAR(+) BUTTON MENU BUTTON WIDE(DOWN) BUTTON POWER INPUT TERMINAL DC 12V ( Please use a specified adaptor) CAMERA CONTROL CONNECTOR This is the 14 pin connector for external camera controls . ( Refer to 4. CAMERA CONTROL METHODS ) VIDEO OUTPUT This is the output terminal for composite video signal . -
Page 7: Installation
3. Installation 3.1 Check all accessories with enclosed package . - HZC-855NX/PX Ser. SET - 14 PIN CONNECTION CABLE (150mm) - OPERATION MANUAL HZC-855NX/PX Ser. * CABLE DESCRIPTION 1. KEY1 ( RED ) 3. ZOOM ( GREEN ) 5. MENU ( WHITE ) 7. -
Page 8: Camera Control Methods
4. Camera Control Methods 4.1 Remote Control using for Hard wired connection ( Connector pin 3,4,5,6 ) 14P Cable 4.2 Remote Control using for RS-232C connection ( Connector pin 10,11,12 ) Connect to Serial PORT ( COM1 or COM2 ) Serial Cable ( 9 Pin D-Sub ) TELE (-) - Page 9 4.3. Remote Control using for RS-422/485 connection ( Connector pin 9,10,11,12 ) -------- OPTION Connect to Serial PORT (COM1 or COM2) Serial Cable Serial Cable 14P Cable ( 9 Pin D-Sub ) 485 Converter 14P Cable RD(TxD) TD(RxD) RS-485 Converter RS-485 Converter TRxD+ TRxD-...
-
Page 10: On Screen Display
5. On Screen Display ⑧ ⑧ ③,④ ① ② ⑤ ⑥ ⑦ ⑧ <Fig5-1. Operating OSD display position> 5.1 How to display Operating OSD a. Pressing the MENU key softly confirm current Operating OSD. It is disappeared about five seconds later if there are no other key actions. b. - Page 11 5.2 OSD SETUP MENU Structure ZOOM SPEED SETUP START ZOOM LENS MODE MENU END ZOOM E-ZOOM AF MODE O. RESET O. AF TIME AF SENS. MIN. DIST. AE MODE MODE WB MODE CONTROL RED GAIN BLUE GAIN NIGHTSHOT MODE MODE BLC/WDR LEVEL MODE...
- Page 12 5.2 Display SETUP MENU a. Press MENU key above 2 seconds so that SETUP MENU 1 is displayed on the screen. b. Select item of SETUP MENU using TELE(up) / WIDE(down) key. c. NEAR(+) / FAR(-) key is used to increase / decrease data of selected item.
- Page 13 ④ E-Zoom Control : ON means up to x230, OFF means only optical zoom region. OFF → ON → ..E-ZOOM ⑤ Set Focus Mode : It is composed of three modes. AUTO :Use to focus automatically all the time. MANUAL : Use to focus manually by pushing NEAR(+) / FAR(-)key.
- Page 14 << SETUP MENU >> LENS MODE AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT <Fig5-5. AE MODE > 5.6 AE MODE ① Exposure Mode : It is composed of five modes according to circumstantial illuminance. AUTO : Exposure is controlled by Shutter Speed,Iris,Gain to meet the Brightenss.
- Page 15 ⑧ MAX FIELDS (option) : Use for compensating the low illumination condition. In case that use this function because of low illumination condition, adjust maximum integration fields to get brighter and dynamical image. But the scene becomes slower than OFF mode. The larger max fields is, simultaneously the noise of image is larger.
- Page 16 ③ RED GAIN (Range is different on each Mode.) : Adjust RED Gain, and tune the sensitivity of white point. 0 → 1 → …. → 254 → 255 MANUAL ④ BLUE GAIN (Range is different on each Mode.) : Adjust BLUE Gain, and tune the sensitivity of white point. 0 →...
- Page 17 5.9 BLC/ WDR Mode ① Backlight Compensation Mode : It is for preventing the center object too darken when the excessive light is behind the center object. Set BACKLIGHT ON, then brighten the center object in the contrast to the background light. Press NEAR/ FAR key in 2 sec, Backlight mode become AUTO.
- Page 18 Left Top, Right Top or not to display. R.BOT → L.TOP → R.TOP → NONE POSITION << CAMERA ID SET >> CAMERA ID DISPLAY CAM ID POSITION R.BOT ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijklmn opqrstuvwxyz12345678 9!?#$%&<>*,.:;/+-=~ TITLE : HONEYWELL RETURN <Fig 5-12. CAMERA ID Setting> - 18 - ■...
- Page 19 ④ Title : It is the name of Camera. It enters 10 characters including blank.. TITLE: ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ▣ How to Enter the Title ▣ Let’s enter the Title as “R1” , example -.
- Page 20 ⑤ Freeze Mode : It pause current image. ON is to stop, OFF is to return to normal state. FREEZE ON → OFF → …. ☞ caution 1. Freeze image does not save when you reset the system. This system doesn’t have its’ own memory. ⑥...
-
Page 21: Specifications
6. Specification Model Name HZC-855NX Pick up Device Total/Effective Pixels 410,000 / 380,000 Scanning System Lens Digital Zoom Ratio Sync. System H. Resolution S/N Ratio More than 50 dB ( AGC OFF ) Min. illuminance 0.5 lx (30IRE) ; 0.05 lx (IR FILTER OFF) ;... -
Page 22: Dimensions
7. Dimensions VIDEO SVIDEO - 22 -... - Page 23 MEMO Honeywell Co., Ltd. Address : 17F, Kukje Center Building 191, Hankangro -2ga, Yongsan-gu, Seoul 140-702, Korea Phone : 82-2-799-6109, 6108, 6107, 6292 Fax : 82-2-749-6119 http : //www.honeywell.co.kr/security/english E-mail : info.security@honeywell.com Printed in Korea G-113864-001 - 23 -...