Maintenance - Honeywell RCA902N Installation Instructions Manual

RCA902A

Maintenance

The product may be cleaned with a soft damp cloth and then wiped dry. Do not use
abrasive, solvent based or aerosol cleaners as this may damage and/or discolour the
product. Take care not to accidentally move the detector head. Do not allow water to
enter or attempt to clean inside the units.
Changing the Motion Detector battery:
Change the detector battery immediately once the low battery indication is noticed,
(i.e. the red LED behind the detector lens flashes 5 times after each movement detec-
tion). Only fit a new Alkaline 9V (6LR61) battery.
21 69-2157EFS—05
69-2157EFS_C.indd 21 9/22/2008 11:54:05 AM