Software Information; Av Input Setup; Av Output Interface Setup; External Device Control (Dnn990Hd) - Kenwood DNN990HD Quick Start Manual

Return to the Top page
Setting Up

Software Information

Check the software version of this unit.
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Software].
Software Information screen appears.
4
Confirm the software version. Touch
[Update] as necessary.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
136

AV Input Setup

You can set AV input parameters.
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
iPod AV Interface Use*
1
Set the terminal which iPod is connected.
Setting values are iPod and AV-IN2.
iPod (Default): You can listen to audio or watch
video in your iPod as iPod
source.
AV-IN2: You can listen to audio in your iPod
as iPod source. You can also listen to
audio or watch video output from a AV
device as AV-IN2 source.
AV-IN1 Name / AV-IN2 Name* 2
Set a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".
*1 This item can be set when in STANDBY
source and also the iPod is disconnected.
*2 [AV-IN2 Name] becomes settable when
"AV-IN2" is selected in [iPod AV Interface
Use].

AV Output Interface Setup

You can select an AV source to be output at
the AV OUTPUT port. Default is "VIDEO1".
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [C] or [D] to set [AV-OUT] to
VIDEO, DISC, iPod, or OFF.
Return to the Top page
Setting Up
External Device Control
(DNN990HD)
Control the external device power supply.
1
Touch [ ] on any screen.
2
Touch [EXT SW].
You can turn on or off the external device
power supply.
NOTE
• You must connect a commercially available relay
unit in order to use this function. Connect the
external device to be controlled to that relay unit.
EXT SW setup (P.131)
• See for information on
setting the power on or off specification.
137