Honeywell RCWL301A Instruction Manual page 3

Installation instructions–RCWL301A
Chime Position
The Chime can be free standing or wall mounted using the wall mounting bracket
provided. If wall mounting is preferred, screw the bracket to the wall (see Fig 7). The
Chime hooks onto the wall bracket as illustrated.
Fig. 7
RPWL3045A Wireless Converter / Extender / Push
Push/Converter functions
The bell push in this kit can be used as a
standalone wirefree push. Additionally, it can
be used to interface with an existing wired
doorbell system or any of the following:
• A standard wired bell push
• A lit bell push and transformer
• A door or window contact
• Any device with N/O or N/C, voltage free
contacts
• Any device which generates appropriate
control signals
< 24 (AC or DC)
See typical connections (C1-7).
C2 is used for included door/window
contacts.
Diagram Application
wired bell push or 'normally
C1
open' switch/contacts
door/window contact, 'normally
C2
closed' switch/contacts
a lit push (with transformer) when
C3
switch is closed, chime will sound
landscape push/converter -
C4
terminal positions
a typical wired bell or chime circuit -
C5
transformer powered
converter connected to a wired bell
C6
or chime -transformer powered
converter connected to a wired bell
C7
or chime circuit - battery powered
Important Note: Additional wiring can be brought into the push through the grommet in
the back of the push. Once the grommet has been pierced or removed, we
recommend that the push is mounted indoors.
Open the bell push/converter
Using a ball point pen press at point A shown in fig 8. Remove the cover. Undo the
retaining screw B and remove the back of the push.
B
Fig. 8
Connect the push/converter/extender to the door contacts.
Fit the Push/Converter/Extender Battery
Insert the CR2032 coin cell. Ensure the face marked '+' is uppermost (Fig. 9).
CR2032 CR2032
Fig. 9
Program the Push/ converter/extender to the chime
• Press the
When the "!" Icon is lit, release the button.
• While the Icon is lit, separate the door contacts. The chime will play the alert sound.
The Icon will flash.
Fix the door contacts to the door and door frame
69-2139EFS—1
M27203
A
button of the chime and keep it pressed. Each Icon will light in turn.
Typical Connection
C1
C2
C5
BELL
~
120V
Operation
when switch is closed,
chime will sound
when switch is opened, chime
will make an 'ALERT' sound
when switch is closed,
chime will sound
when push is operated,
chime will sound
when push is operated,
chime will sound
3
C4
C3
1
2
3
4
1
5
2
3
4
5
1
2
3
4
5
C6 C7
BELL
BELL
1
2
3
4
5
~
120V
1
5
2
4
3
1
2
3
4
5