Care And Cleaning; Cleaning The Interior And Exterior; Defrosting The Wine Chiller; In The Event Of A Power Failure - Honeywell 88013 Use And Care Manual

CARE AND CLEANING

TO CLEAN THE INSIDE AND THE EXTERIOR OF THE WINE
CHILLER
Always safely unplug the chiller before cleaning. Do not use a hard brush or sponge. To clean
the outside of the unit, use light soapy water with a cloth. When cleaning the inside DO NOT
use soap or any detergent products. Use only a dry soft cloth or towel.

DEFROSTING THE WINE CHILLER

If frost builds up in and around the chiller, that means there is too much humidity near the
unit. Safely unplug the chiller and once the frost melts, carefully wipe down the outside or
inside of the chiller. Then, move the unit to a less humid location.
NOTE: DO NOT USE A HEATER OR A SHARP UTENSIL TO REMOVE THE FROST.

IN THE EVENT OF A POWER FAILURE

In the event of a power failure, do not open the wine chiller door too frequently to
ensure the internal temperature remains the same. A slight and gradual increase in
temperature should have no effect on the wine.
If the ambient temperature is very hot, remove the wine from the chiller and place in a
cooler environment.
PREPARING THE WINE CHILLER FOR VACATION
For long vacations or absences, remove all bottles from the wine chiller and safely unplug the
power supply. Move the thermostat to the lowest temperature setting before cleaning the
interior and leave the door open.

TRANSPORTING THE WINE CHILLER

For transporting the wine chiller, secure all loose items, such as shelves by taping them
securely in place to prevent damage.
NOTE: BE SURE THE WINE CHILLER ALWAYS STAYS IN AN UPRIGHT POSITION
DURING TRANSPORTING.
9