Tools Required
12 mm wrench, 10 mm wrench, and a Phillips screwdriver
Unpacking
1. Remove all the cardboard. Inspect the loose parts. Missing parts
can be obtained from the Honda dealer who sold you the
snowthrower.
Qty.
Description
4
Curved head bolt 8 x 40 mm
4
Flange nut, 8 mm
4
Curved washer, 9 mm
3
Phillips head shoulder screw 6 x 12 mm
3
Flange nut, 6 mm, Nylock
2
Cable tie (AS model only)
2
Key
2. Loosen and remove the curved-head bolt, flange nut, and starter
bracket from the lower handlebar. Do not discard the hardware.
Assembly
1. Install the handlebar
with the hardware
shown. Tighten the
flange nuts securely.
Part number
90109-VA4-000
94050-08000
90501-898-000
90112-V10-000
90303-V10-000
32901-VB5-A00
35110-766-003
9 mm CURVED
WASHER (4)
8 mm FLANGE
NUT (4)
SET-UP
8 x 40 mm
CURVED HEAD
BOLT (4)
39