Panasonic RS-485 Configuration page 3

Configure DVR Programming - 3
• In the Advanced programming
menu, under COMM, RS485,
Control Camera Channel:
• Set the cameras to the correct
RS485 ports
Rear of DVR
Cabling
• DVR Side
• Transmit A goes to Receive A
• Transmit B goes to Receive B
• Receive A goes to Transmit A
• Receive B goes to Transmit A
• When using Half Duplex – 2 wire: The camera only receives information, the DVR
only transmits information.
• The pigtail on the camera can be plugged directly in to the DVR
Camera Side
3