Honda H6522 Owner's Manual page 89

f. Install the driveline for PTO-driven
attachments.
l
Push and hold the lockpin and
slide the driveline collar over
the PTO shaft.
Move the driveline collar back
and forth to be sure the lockpin
is seated.
h.
Use the turnbuckle adjuster on the
right side of the lift rod to get the
attachment horizontal. After ad-
justing, secure with a lock nut.
Adjust the check link as instructed
in the attachment manual, and ob-
tain the adequate free play in the
right and left directions.
CHECK LINK
l
After installing an attachment, be sure all lock pins are secure.
l
When operated at sharp angles, a PTO driveline can make noise. Adjust
the top link or limit upward travel to reduce the angle. Continued opera-
tion of a PTO driveline at sharp angles will cause damage to the
driveline, attachment, or tractor.
l
Be sure there is some freeplay in the check links. If they are adjusted
too tightly, they may break.
l
Use only attachments that meet Category 1 specifications.
87