Cisco CB21AG Installation And Configuration Manual page 109

Chapter 5 Configuring the Client Adapter
Figure 5-13
Step 3 Check the Use Machine Information For Domain Logon check box if you want the client to attempt
to log into a domain using machine authentication with user credentials rather than user authentication.
Doing so enables your computer to connect to the network prior to user logon. The default setting is
checked.
Note
Step 4 Choose the certificate authority from which the server certificate was downloaded in the Trusted Root
Certification Authorities drop-down box.
Step 5 Choose either Token or Static Password, depending on your user database.
Note
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Define PEAP (EAP-GTC) Configuration Window
If you do not check the Use Machine Information For Domain Logon check box, machine
authentication is not performed. Authentication does not occur until you log on.
If you choose Token, you must use a hardware token device or the Secure Computing SofToken
program (release 2.1 or later) to obtain the one-time password and enter the password when
prompted during the authentication process. Secure Computing PremierAccess release 3.1.1 or
later is the only supported token server.
Setting Security Parameters
5-43